Allicdata Part #: | 10NA220MEFC8X11.5-ND |
Manufacturer Part#: |
10NA220MEFC8X11.5 |
Price: | $ 0.07 |
Product Category: | Capacitors |
Manufacturer: | Rubycon |
Short Description: | CAP ALUM 220UF 20% 10V RADIAL |
More Detail: | 220µF 10V Aluminum Electrolytic Capacitors Radial,... |
DataSheet: | 10NA220MEFC8X11.5 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2000 +: | $ 0.05741 |
Series: | NA |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Capacitance: | 220µF |
Tolerance: | ±20% |
Voltage - Rated: | 10V |
ESR (Equivalent Series Resistance): | -- |
Lifetime @ Temp.: | 2000 Hrs @ 85°C |
Operating Temperature: | -40°C ~ 85°C |
Polarization: | Bi-Polar |
Ratings: | -- |
Applications: | General Purpose |
Ripple Current @ Low Frequency: | 205mA @ 120Hz |
Ripple Current @ High Frequency: | 246mA @ 10kHz |
Lead Spacing: | 0.138" (3.50mm) |
Size / Dimension: | 0.315" Dia (8.00mm) |
Height - Seated (Max): | 0.512" (13.00mm) |
Surface Mount Land Size: | -- |
Mounting Type: | Through Hole |
Package / Case: | Radial, Can |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum electrolytic capacitors are primarily used in applications that require a large amount of capacitance in a relatively small space. Aluminum electrolytic capacitors are a type of polarized capacitor that use an aluminum oxide as a separator. The aluminum oxide acts as an insulator and allows a large dielectric field to be established between the anode and cathode. This dielectric is capable of storing large amounts of charge, allowing it to store large amounts of capacitance. The aluminum electrolytic capacitor with the part number 10NA220MEFC8X11.5 is used in various application fields and has the following working principle.
The aluminum electrolytic capacitor with the part number 10NA220MEFC8X11.5 is mainly used in electronic power supplies, voltage regulation, damping circuits, rectifying circuits, stabilizing circuits, filtering circuits, blocking circuits, and signal coupling circuits.
The working principle of the capacitor is based on the Faraday law of electrolysis. When a voltage is applied to an electrolytic cell, current is passed through the electrolyte and an oxide film is formed on the anode in proportion to the applied voltage, forming an insulation layer. This layer causes electric charges to be accumulated on the inner and outer surfaces of the aluminumoxide film, thus forming a capacitance. Due to the dielectric constant of the oxidation film, the capacitance of this capacitor is much larger than other types of capacitors.
The aluminum electrolytic capacitor with the part number 10NA220MEFC8X11.5 has a wide range of applications such as in voltage regulation, signal filtering, starting circuits for motors, audio equipment, and automotive electronics. It can also be used to provide filtration for power lines, filter high voltage surges, and stabilize the input power of a device.
The 10NA220MEFC8X11.5 aluminum electrolytic capacitor has a wide operating temperature from -40°C to +105°C, and its rated voltage is 220VAC with a rated ripple current of 8A. It also has a maximum dimensions of 11.5mm width, 12mm length, and 25mm height. The capacitor has a small size, high dielectric properties, high stability, and it is also used in a large number of applications.
The 10NA220MEFC8X11.5 aluminum electrolytic capacitor has a requirement for a relatively low wattage and a low cost. It is the ideal choice for many applications and is popularly used due to its advantages of being smaller, lighter, and more efficient than other capacitors. The 10NA220MEFC8X11.5 aluminum electrolytic also has a high capacitance, low ESR and low equivalent series resistance and is ideal for applications in electronic power supplies, voltage regulation, rectifier, motor starting and signal coupling circuits.
In conclusion, the 10NA220MEFC8X11.5 aluminum electrolytic capacitor is a type of polarized capacitor which uses an aluminum oxide as a separator. It is mainly used in electronic power supplies, voltage regulation, damping circuits, rectifying circuits, stabilizing circuits, filtering circuits, blocking circuits and signal coupling circuits. It has a wide operating temperature range from -40°C to +105°C and its rated voltage is 220VAC with a rated ripple current of 8A. It also has a small size, high dielectric properties, high stability, and is widely used due to its advantages of being smaller, lighter, and more efficient than other capacitors.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
10NA100MEFC6.3X11 | Rubycon | 0.05 $ | 1000 | CAP ALUM 100UF 20% 10V RA... |
10NA220MEFC8X11.5 | Rubycon | 0.07 $ | 1000 | CAP ALUM 220UF 20% 10V RA... |
MS3181-10NA | Amphenol Pcd | 7.51 $ | 591 | RCPT COVER SHELL SIZE 10 ... |
MS3181-10NAL | Glenair | 0.0 $ | 1000 | RCPT COVER SHELL SIZE 10 ... |
PVS81-10NA | ITT Cannon, ... | 234.4 $ | 1000 | CIRCULAR |
BK/MDL-1-2/10NA | Eaton | 1.7 $ | 1000 | FUSE GLASS 1.2A 250VAC 3A... |
EPM3032ATC44-10NAA | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 32MC 10NS 44TQFP |
EPM3032ATC44-10NAB | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 32MC 10NS 44TQFP |
EPM3064ATC100-10NA | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 64MC 10NS 100TQFP |
EPM3064ATC44-10NAF | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 64MC 10NS 44TQFP |
EPM3064ATI44-10NAD | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 64MC 10NS 44TQFP |
EPM3064ATI44-10NAE | Intel FPGAs/... | 0.0 $ | 1000 | IC CPLD 64MC 10NS 44TQFP |
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...