XC6108N36DGR-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Interface) is a crucial component of electronic devices. PMICs are used to manage the supply and operation of multiple components that are connected through a single board. The XC6108N36DGR-G is one such PMIC, used in a variety of applications with its excellent features and performance. In this article, we will discuss the application fields and working principle of the XC6108N36DGR-G.

The XC6108N36DGR-G is a pass-transistor supervisor that is designed for high-reliability applications. It is designed to drive an SCR for high-side switching and can be used for load disconnect, resistor breakdown, inrush current limit, or bus hold-off. It is a very low power device, with a maximum operating supply current of 1µA.

The XC6108N36DGR-G is suitable for a variety of applications including power supply monitoring, power switch control, access protection, over-temperature protection, and more. It is mainly used in industrial control systems, automotive systems, medical systems, and communication systems. It can be used for various application such as general-purpose fault protection, power management for battery powered devices, monitoring power rail voltages in high-precision systems, as well as motor control.

The XC6108N36DGR-G works by monitoring the voltage level on a power rail and controlling a pass transistor. When the voltage level on the power rail is higher than the specified threshold, the XC6108N36DGR-G will activate the pass transistor, thus allowing current to flow. When the voltage level drops below the specified threshold, the XC6108N36DGR-G will deactivate the pass transistor, thus preventing current from flowing.

The XC6108N36DGR-G uses four external pins (VIN+, VIN-, VOUT+, VOUT-) to control output current. The input pins (VIN+, VIN-) are used to monitor the voltage level on the power rail, while the output pins (VOUT+, VOUT-) are used to control the pass transistor. The XC6108N36DGR-G also includes an Enable input pin (EN) that can be used to enable/disable the device.

The XC6108N36DGR-G also has several features to improve reliability, such as an over-temperature protection and a voltage spike protection. These features ensure that the XC6108N36DGR-G will not be damaged by a sudden surge in the power rail voltage. The device also has an adjustable delay function that can be used to minimize the current spike when the pass transistor is switched on or off.

In conclusion, the XC6108N36DGR-G is a pass-transistor supervisor designed for high-reliability applications. It is mainly used in industrial control systems, automotive systems, medical systems, and communication systems. It features an adjustable delay function, an over-temperature protection, and a voltage spike protection. It works by monitoring the voltage level on a power rail and controlling a pass transistor.

The specific data is subject to PDF, and the above content is for reference