VI-23R-EU-F4 Allicdata Electronics
Allicdata Part #:

VI-23R-EU-F4-ND

Manufacturer Part#:

VI-23R-EU-F4

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 7.5V 200W
More Detail: Isolated Module DC DC Converter 1 Output 7.5V 2...
DataSheet: VI-23R-EU-F4 datasheetVI-23R-EU-F4 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: VI-200™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 42V
Voltage - Input (Max): 60V
Voltage - Output 1: 7.5V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 26.67A
Power (Watts): 200W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, OTP, OVP, SCP
Operating Temperature: -10°C ~ 85°C
Efficiency: 88%
Mounting Type: Through Hole
Package / Case: Full Brick
Size / Dimension: 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC/DC converters are components that are designed to convert electric power from one form to another. This type of converter is usually used for reducing the voltage that is used to power a device, such as a laptop or mobile phone, from a primary source, such as a power grid or batteries. The VI-23R-EU-F4 is a DC/DC converter that is designed for different applications.

The VI-23R-EU-F4 is a small and efficient DC/DC converter that has a wide input voltage range and helps to ensure the consistent performance of the device that it powers. It is designed to convert a wide input voltage range of 8 to 36 volts to a regulated output voltage of either 3.3 or 5 volts. It is also capable of handling input surge currents of up to 30 amps. The VI-23R-EU-F4 is designed for applications where the input voltage is less stable than the required output voltage.

The VI-23R-EU-F4 has a high power density, making it ideal for applications that require a small amount of space. The device is also designed with overload protection and over temperature protection to ensure that it operates safely. The converter also has an efficiency rating of up to 70%, meaning that more energy is able to be used by the device that it is powering. The VI-23R-EU-F4 also boasts excellent EMI performance, meaning that it can be used in environments where there is a lot of electrical interference.

The VI-23R-EU-F4 is designed to work in a wide variety of applications, including industrial, automotive, medical, telecommunications and instrumentation. Thanks to its ability to handle various input voltage ranges, the device is able to provide effective power conversion in these applications. It can also be used in applications that require high efficiency and low ripple noise.

The VI-23R-EU-F4 is a step-down switching DC/DC converter, meaning that it converts a higher input voltage to a lower output voltage. The converter is based on a flyback topology, meaning that it uses a transformer to convert the power from one form to another. During the process, the transformer steps down the input voltage to match the required output voltage. The transformer also serves as an isolation barrier, which helps to ensure the safety of the device and the user.

The VI-23R-EU-F4 uses a switching regulator to regulate the current flow from the input voltage source to the device. The current is intermittent and this helps to reduce losses that would occur if the current was continuous. The regulator also helps to ensure that the input voltage remains stable, which enables the device to provide a consistent output voltage.

The VI-23R-EU-F4 is a high-efficiency, small-sized DC/DC converter that is designed for a wide variety of applications. It has a wide input voltage range and is capable of providing a regulated output voltage of either 3.3 or 5 volts. The device is designed with overload protection and over temperature protection, and has an efficiency rating of up to 70%. It is based on a flyback topology and uses a switching regulator to regulate the input voltage and provide a consistent output voltage, ensuring the performance of the device it is powering.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics